6l80e Operating Temperature - api

Passenger’s side behind bell housing.

— the early rivet head is 0. 040” (1. 016 mm) thick (figure 3), while the later rivet head (figure 4) is about 0. 065” (1. 651 mm) thick.

Did i purchase a re man with a bad temp sensor possibly

— what is the maximum temp the trans can operate at before damage?

I am putting together the most complete guide to tuning and dealing with a 6l80e transmission here.

— i have always wondered what the max tranny temp should reach on a 6l80?

I would think the extra cooling capacity provided by the.

I haven't gotten any.

What is a good transmission temperature range for a 6l80 in a 2015 chevy silverado 1500.

— just replaced my 6l80 transmission in a 2016 silverado lt 1500 4x4.

I am not familiar with trans temps in these trucks.

— as the temperature reaches the desired temp the plunger retracts and allows the fluid to flow normally.

I wont be able to help with your tune, but i've been monitoring.

There are no wires that actuate it, so you can't tune it out.

Some say 220 next one say 240 since it has dexron vi.

— i just recently bought a 09 silverado 1500 with the 6l80e trans.

📸 Image Gallery

— the 6l80e transmission fluid temperature sensor is important in maintaining the optimal temperature of the transmission fluid.

Also can the fluid be to cold and cause an issue, if so what temperature would be.

I've had it up around 180 to 190 degrees f while driving (sometimes pulling a trailer).

— i'm curious, does anyone know what the proper operating temperature for the 6l80e transmission is?

— hi everyone got a little bit of a question about the temperature of the transmission fluid but i'm not sure it should be a concern yet 2011 gmc sierra 1500 with the six speed 6l 80.

And the next ass.

I hope you enjoy this, and more importantly, learned some.

— since trans temps consistently run above the coolant temp, why would bypassing the radiator lower the trans temps?

It monitors the temperature of the fluid and.

Here are the basic specs for the 6l80e:

Another common early failure with this converter.

Pressure test specifications, have transmission full of fluid and warmed to operating temperatures, use.